So the next day the new challenges!
As I've told before I could not get Miraclebox 9 TWIN PVR as intented yesterday so trying new again.
I thought that maybe if I install Enigma2 to my box it will work as I want it to work. So nothing more than starting to downgrade my boxes bootloader from 6.0 to 5.04 so I can install Enigma2 and other images.
Here is the tutorial how to do it:
Then the first image I tried was Miraclebox-hd9_GIT-3300_PKT-1364_L504.ird and at first it looked good. I could use internet browser to use the box etc. but then the BIG PROBLEM.
As you might remember from my previous postings I do have 2x DVB-C -tuners and with this current image it can't find any tuners. So again, trying some other image.
This time I'm trying image by Octagon which should work with my box because they are done by relatively same hardware. I found a list from some forum which says that following boxes are with same hardware and images may / should work with them. The following boxes are:
Must try some other image after some while.
Next image I'm going to try is MiracleBox-HD-9-GREEN-LINE-3.0-LD504. I have tried this before but back then I could not get pay-tv-channels or HD-channels to work and I'm hoping I'll do some magic tricks whilst installing software.
Maybe now I'm more lucky!
Here is the tutorial how to do it:
Tutorial How to Downgrade Miraclebox 9HD LD6.00 => LD5.04You flash each software by copying each file (one at a time) to a FAT32-formatted USB, have the receiver turned off, put the power while pressing ARROW UP til the SCAN USB appears. Then let the receiver do its job. Do this with each file.1. Flash DOWN_LD_504_M9_STEP1.ird2. Flash DOWN_LD_504_M9_STEP2_LOADER.ird3. Flash M9 SW 1.09.35.ird.4. Now You can flash by ARROW UP and POWER on Enigma2 images IRD files, or other MiracleBox HD9 images.Notice that you will need to upgrade to 1.09.99 before updating to a V2.0X.XX software.
Then the first image I tried was Miraclebox-hd9_GIT-3300_PKT-1364_L504.ird and at first it looked good. I could use internet browser to use the box etc. but then the BIG PROBLEM.
As you might remember from my previous postings I do have 2x DVB-C -tuners and with this current image it can't find any tuners. So again, trying some other image.
This time I'm trying image by Octagon which should work with my box because they are done by relatively same hardware. I found a list from some forum which says that following boxes are with same hardware and images may / should work with them. The following boxes are:
So I tried with the Octagon image FAC.Octagon.SF1028PHD.CIP.v2.11.34.2013Jan11.ird but while I try to install it I get ERR: 0x10. So this image is no good with my box.Fortis HS-8200HD PVRRebox RE-8000HD PVROctagon SF-1028P*Atevio AV 7500 HD PVRSkyway DroidOpenbox S9 HD PVRIcecrypt STC6000 HDPVRMiraclebox9 Twin HD PVRXCruiser XDSR600HD
Must try some other image after some while.
Next image I'm going to try is MiracleBox-HD-9-GREEN-LINE-3.0-LD504. I have tried this before but back then I could not get pay-tv-channels or HD-channels to work and I'm hoping I'll do some magic tricks whilst installing software.
Maybe now I'm more lucky!
you are invited to follow my blog
VastaaPoista